Rockler Cast Iron Router Table Master Kit with Cabinet and Pro Lift

If you're looking for the ultimate router table, your search is over. This package outfits our premium cast iron top with the Pro Lift, which features Quick-Gear lifting action and Snap-Lock button-release insert rings, the ProMax Fence with microadjustability, jointer bars and top-mounted knobs for comfortable adjustments, and an open steel stand with a Dust Bucket for collecting shavings both above and below the table. In addition, we've thrown in an armload of awesome accessories to make your routing safer, cleaner and more accurate (see bottom for details). Nothing beats cast iron when it comes to a sag-free, dead flat surface and reliable performance year in and year out. A one-piece top weighing in at over 50 pounds and measuring a full 32'' wide, it provides vibration-dampening heft for the smoothest possible cuts. Spin the largest bits your plate and router can accept—the table won't bat an eye. Premium features include a 10-point plate leveling system and pre-tapped holes to accept the included Dado Dust Chute and Steel Cabinet. The 3/4'' T-profile miter slot accepts precision aftermarket miter gauges, while accessory T-tracks in both the fence and table accept stops, hold-downs, featherboards and more. A bit guard and dust port are both included.

Features:

• Strong, durable 1-1/2'' thick solid cast iron table is machined flat and weighs over 50 pounds to reduce vibration for smooth routing results
• 32'' x 24'' tabletop provides more than five square feet of work surface and is designed to stand up to heavy use
• Dual Track with accessory T-track and ''T'' miter slot is machined directly into the table's surface
• 10-point plate-leveling and locking system maintains a perfectly flush surface and prevents plate from shifting during cut
• Underside of tabletop features tapped holes (and included screws) for included Dado Dust Chute and Steel Cabinet
• Microadjustable ProMax Fence features extruded aluminum backer and integral jointing system
• Top-mounted fence knobs provide easier access to adjustments from the front of the table
• Melamine-coated sub-fences adjust without tools to provide maximum support on either side of the bit
• Jointer bars slide into slots in the fence to shave off material in precise increments
• Includes heavy-duty bit guard and dust port on the back of the fence
• Universal T-tracks accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts - perfect for hold-downs, stops and featherboards
• Dust Bucket includes splitter that captures routing debris from both above and below the table

Includes the award-winning Rockler Pro Lift with Quick-Gear rapid height adjustment and tool-free Snap-Lock insert rings!

Two patent-pending features raise the Rockler Pro Lift into a class of its own: ultra-fast ''Quick-Gear'' height adjustments and ''Snap-Lock'' tool-free insert ring changes. Push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the table in just seconds. Once the bit is installed, quickly lower it, click in the insert ring, and use the fine adjustment gear to set the final height to within 0.001''. Anti-backlash mechanism keeps the router from creeping downward—lock knob provides further insurance when running very large jobs. Heavy-duty steel construction with bronze bushings and a 3/8'' thick machined aluminum plate.

Will my router fit?

The Pro Lift accepts router motors with a 4.2'' diameter (13.85'' circumference). Examples include the Porter-Cable 7518 and 7519.

Lift Adaptors available for smaller router motors!

Optional adapters are available that allow the Pro Lift to accept routers with smaller motors. If you are unsure of your router motor's diameter, check the manual, or measure the circumference with a tailor's tape. The collars have an expansion gap, so they will accept motors measuring 1/8'' larger or smaller in diameter than the listed spec.

• 3-1/4'' Pro Lift Adapter Collar (#50098, sold separately) accepts motor with 3-1/4'' diameter or 10.21'' circumference
• 3-1/2'' Pro Lift Adapter Collar (#57022, sold separately) accepts motor with 3-1/2'' diameter or 11'' circumference

Includes six of our most popular accessories for safety, accuracy and convenience!

• Router Fence Storage Tray provides an easily accessible place to keep bits, insert rings, collet wrenches and more.
• Dado Dust Chute captures the jet of dust that shoots out of the dado while routing.
• Safety Power Tool Switch provides an easily accessible off switch for emergencies.
• Table Featherboard Table featherboard keeps wood snug against the fence for safer, cleaner cuts.
• Fence Featherboard holds wood down against the table for better accuracy and consistency.
• Set of 5 Snap-Lock Insert Rings provide support for a wide range of bit sizes—just push the button to release!