Rockler Quick-Release Pock-It Hole Clamp

The Rockler Pock-it Hole Clamp gives you perfect alignment, every time, thanks to two included steel alignment pins, one for standard pocket holes, the other for micro pocket holes. The pin not in use stores conveniently on the clamp. Setup is easy with the quick-release button, which lets you slide the clamp closed in an instant—no tedious winding of the screw. A flat area on the top of the clamp lets you use a pocket hole face clamp (or an ordinary F-clamp) to ensure the surfaces remain flush as you drive the screws. The ratcheting handle allows for final tightening, even when the handle is lying close to the benchtop. To use, clamp the joint using one pocket hole, insert a screw in the neighboring hole and drive it home. Maximum face frame width is 3-3/4'' for the piece that is screwed into, allowing you to easily use standard 3-1/2'' stock.

Rockler Quick-Release Pock-It Hole Clamp Details:

• Unique design allows easy clamping and surface alignment of pocket hole joints
• Includes two interchangeable steel alignment pins: one for standard pocket holes and one for micro pocket holes. Both store on clamp
• Just thread the appropriate alignment pin into the clamp and fit the pin into pocket hole while the clamp tightens the joint—pin features knurled thumbscrew and is threaded for easy depth adjustment to keep it from bottoming out
• Works with face frames and casework measuring 3/4'' thick, or thicker
• Clearance in the clamp body enables clamping and fastening of joints with two or more pocket holes
• Ratcheting handle can be pulled back and rotated into horizontal position when clamping face frames flat on a work surface
• Tighten or release the handle quickly and easily using the upgraded steel quick-release mechanism
• 1/2'' steel post features Acme threads for precise adjustments and a strong hold
• Post has non-marring pad to help protect workpiece
• Flat area on top of body is shaped to allow use of face clamp or other clamp to keep pieces flat on work surface
• 3-3/4'' wide stock capacity for the piece that is screwed into
• Sturdy cast aluminum body with durable powder-coat finish

Important Note: For proper alignment, be sure steel pin does NOT bottom out in the pocket hole.