Alumilite Clear Urethane Casting Resin, 2 lb.

You've gotten pretty good at making pens and knives, now it's time to try your hand at making the colorful, swirling blanks that make them stand out from the crowd. It's surprisingly easy with Alumilite Clear casting resin. Alumilite Clear has a 7-minute open time and a 90-minute demold time at 75°F with 100g of resin, making it convenient to use for small, easily manageable casting and turning projects. And with our wide selection of opaque and translucent dyes (e.g. #67408, sold separately), you can mix up a blank with your customer's favorite team colors, the colors of a flag, or colors to represent a special occasion or special cause. Once cured, the resin turns like butter and polishes to a high gloss.

Alumilite Clear Details:

• Impact-resistant when fully cured
• Convenient 1:1 mix ratio (by weight)
• Low viscosity for easy mixing
• Easily dyed or pigmented
• Can be turned, drilled, sanded, and polished to a high gloss
• Minimal bubbles can be achieved by slowly mixing and pouring—pressure casting is recommended for bubble-free results

Notes: Off-mixing may produce hazy or frosted parts. The clarity of resin will shift from batch to batch based on the clarity of incoming raw materials. In most cases, this will not affect product unless used over white backgrounds.

Shelf Life: The shelf life of Alumilite Clear and Water Clear is 3 months in an unopened container. We highly recommend using it within its shelf life to maintain optimum clarity and stability.